Summary
You need to access the Anchoring to Concrete module before you can define materials, modify geometry, or run anchor design calculations. This article explains how to open the module to start your design workflow.
Prerequisites
Make sure you have:
- A valid Hilti account
- Access to PROFIS Engineering
- A stable internet connection
Step-by-Step instructions
-
Go to the PROFIS Engineering website
https://profisengineering.hilti.com/ -
Log in to your account
Enter your Hilti credentials to access your workspace. -
Open the Anchoring to Concrete module
Click New in the top-left corner.
From the available options, select Custom design.
-
Select the fixing type
Choose Concrete from the fixing type options. -
Customize settings (Optional)
If needed, adjust:- Anchor calculation method & approvals
- Units
- Safety factors and default parameters
Click Save once finished.
-
Start a new design
After selecting the fixing type, your Anchoring to Concrete design workspace will load automatically.
Alternative access method
On the PROFIS Engineering home page, you can also click the Anchoring to Concrete tile directly under the Applications section in the center panel.
Tips
Module availability depends on your region and permissions. Contact your local Hilti representative if you cannot access the module.